Daihatsu Remote No.2

Procedure:
1. Ensure all doors are closed.
2. Ensure Ignition is OFF.
3. Disconnect battery negative terminal.
4. Within 15 seconds of disconnecting terminal,connect negative terminal and press remote control LOCK and UNLOCK buttons, or just the UNLOCK button on some models for a minimum of 5 seconds.
5. The vehicle will LOCK and UNLOCK.
6. Then within 5 seconds press the LOCK and UNLOCK buttons, or just the UNLOCK for a minimum of 1 second until vehicle LOCKS and UNLOCKS.

If programming a second remote control repeat steps 4 to 6.
NOTE : Maximum of 4 remotes can be programmed.