Ford Falcon Territory remote Programming

Maximum Number of remotes: 8

Existing remotes must be re programmed:

All must be re programmed , Optional

Starting state:
All doors closed, courtesy light on auto, key out of Ign
Step 1: Turn key to Acc

Step 2:
Press rear window heater button 6x within 5 seconds (on/off 3x)

Step 3:
Doors will cycle normally within 2-10 seconds

Step 4:
Press lock or unlock button on each remote

Step 5:
Locks will cycle 1x for 1st remote 2x for 2nd remote etc

Step 6:
Turn Ignition off lock and unlock doors to exit programming

Notes:

In step 1 if you turn ign past Acc you must start again
If it fails try holding key to the clockwise side of the Acc position
Or try just pushing the heater button 3x only