Mazda 323 626 Remote Programming

Maximum Number of remotes: 3

Starting state:

All doors closes key removed from ignition

Step 1: Open drivers door

Step 2: Key into ignition

Step 3:
Turn from lock to on and back to lock 3x

Step 4: Remove key from ign
Step 5:
Press and release the driver's door position switch 3x

Step 6: Door locks should cycle

Step 7:
Press any button on the 1st remote 2x

Step 8: Door locks will cycle
Step 9:
Press any button on next remote 2x

Notes:

If it is not working try leaving key in ign or close door after cycling the door position switch