Mazda 2000+ Remote Programming

Maximum Number of remotes: 3
Starting state:
All doors closes key removed from ignition

Step 1: Open drivers door

Step 2: Key into ignition

Step 3:
Turn from lock to on and back to lock 3x
Step
4:
Press and release the driver's door position switch 3x

Step 5: Door locks should cycle

Step 6:
Press any button on the 1st remote 2x

Step 7: Door locks will cycle

Step 8:
Press any button on next remote 2x

Notes:
If it is not working try removing key from ign or close door after cycling the door position switch