Mitsubishi Hazards Colt+ Lancer Airtrek Remote Programming

Maximum Number of remotes: 4

Existing remotes must be re programmed:
All must be re programmed

Starting state:
Doors closed key out of Ignition interior light on auto

Step 1:
Put Key into ignition, leave in locked position

Step 2:
Within 10 seconds short pins 1 & 4 of OBD

Step 3:
Within 10 seconds press hazard light switch 6 times

Step 4: Locks will cycle

Step 5:
Press lock or unlock button 3x

Step 6:
Repeat step 5 for subsequent remotes

Step 7: Disconnect pins 1 and 4

Notes:
If you're having problems lock and unlock drivers door with the key then start again